Aranizer Cleaning Instructions
From: "Tom Harrelson" tharrels1@...
Date: Tue Sep 21, 2004 7:58 am
Subject: REVISED Aranizer Cleaning Instructions
Hi all!
I NEEDED to be SURE that ANYONE, who owns an Aranizer Air
Purifier Unit, realizes that he/she NEEDS to be SAFE (see Step 1),
while cleaning his/her Aranizer, and so I'm posting these REVISED
Aranizer Cleaning Instructions. I received these Basic Cleaning
Instructions a few years ago from Ted Trikilis, President and Owner
of ARAN-AQUA Co.. FYI, ANY Electronic Components, which would be
DAMAGED by Water, have been coated with a SPECIAL Compound. Besides,
you're ONLY dip the Metal Case of the Aranizer HALFWAY. I've done
this Cleaning Procedure at various times in the past for my SS-4x
Aranizer.
Aranizer Cleaning Instructions
If you use your Aranizer Air Purifier Unit on a REGULAR Basis, I'd
recommend cleaning your Aranizer at least EVERY 6 Months, and if
there's HEAVY Pollution involved, then you NEED to clean your
Aranizer Air Purifier Unit EVERY 3 Months.
1. UNPLUG your Aranizer Air Purifier Unit from the A.C. Outlet!!
2. Put on a pair of Heavy Rubber or Canvas Gloves.
3. Fill a Bucket/Pail with VERY HOT Water (no soap).
4. Hold onto the Power Cable about 1-2 ft. from that end of your Aranizer's Metal Case.
5. Dip your Aranizer up and down 10 times into the Bucket, allowing
it to go into the Water ONLY about HALFWAY up it's Metal Case.
6. Grab the Metal Case with it's Vents pointing downward towards the Floor.
7. Hold TIGHTLY and shake it ENOUGH times, so that ANY EXCESS Water
has basically been REMOVED.
8. Allow your Aranizer to dry for at least 12 hours.
"THANKS" for your time and interest!
Tom/Psa. 103:1-5.
Join our mailing list and learn about oxygen therapies at:
http://health.groups.yahoo.com/group/oxyplus/